Scope 1 carbon emissions
Contents |
[edit] Scope in terms of carbon emissions
The Green House Gas Protocol Corporate Standard classifies GHG emissions into three ‘scopes’.
Scope 1 emissions are direct emissions from owned or controlled sources. Scope 2 emissions are indirect emissions from the generation of purchased energy. Scope 3 emissions are all indirect emissions (not included in scope 2) that occur in the value chain of the reporting company, including both upstream and downstream emission
[edit] What are scope 1 site emissions ?
Scope 1 emissions include direct emissions used on-site such as natural gas and fuel, refrigerants, and emissions from combustion in owned or controlled boilers. So these will differ if measuring emissions from a construction site itself, measuring emissions from a building (once complete) or from the companies involved in the project. It does also include emissions from fleets of vehicles (e. g. cars, vans, trucks, lorries etc).
Thus scope 1 emissions would encompass process emissions that are released during industrial processes, if this is on-site manufacturing, id off-site it is more likely to become scope 2 or 3 emissions.
[edit] What are indirect emissions ?
The GHG Protocol defines indirect emissions as “a consequence of the activities from the reporting company but occur at sources owned or controlled by another company.” unlike direct emissions, so these include Scope 2 and Scope 3 emissions. but the protocol makes a clear distinction between the two categories.
[edit] Related articles on Designing Buildings
- Carbon terminology.
- Greenhouse gases.
- ISO 14001:2004 Environmental management system -- Requirements with guidance for use.
- Life cycle assessment.
- PAS 2060.
- PAS 2080 Carbon management in Infrastructure.
- Scope 2 carbon emissions.
- Scope 3 carbon emissions.
- The Carbon Project: improving carbon emission data.
[edit] External links
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.
Overheating guidance and tools for building designers
Guidance for dealing with element of building fabric control that have increasing importance.
Shading for housing, a design guide
From the Good Homes Alliance and British Blind and Shutter Association.
UK Standard Skills Classification (SSC)
A shared framework for describing skills needs.
Social media ban consultation comes to close
CIOB urges UK Government to consider social media’s role in careers guidance in ban debate.
The latest of eight Skills England apprenticeship units
The addition of battery manufacturing welcomed by ECA with a warning about the risks of fast-tracked apprenticeship units.
Building Control Independent Panel final report
A precis of a key report led by Dame Hackitt with full recommendations and link to the government response.